5
• The supplied AC adapter supplies
19 volts and delivers at least 200
milliamps. Its center tip is set to
negative and its plug properly fits
the transmitter’s
19V 200mA
jack.
Using an adapter that does not
meet these specifications could
damage the transmitter or the
adapter.
INSTALLING THE
HEADPHONES’
BATTERIES
To power the headphone receiver, use
the two supplied AA nickel-cadmium
rechargeable batteries.
Cautions:
• Use only fresh batteries of the
required size and recommended
type.
• Do not mix old and new batteries,
different types of rechargeable
batteries, or rechargeable batter-
ies of different capacities.
Follow these steps to install the batter-
ies.
1. Remove the battery compartment
cover on the right earpiece by
pushing up the tab and pulling up the
cover in the direction of the arrow.
2. Place the batteries over the ribbon in
the compartment, as indicated by the
polarity symbols (+ and –) marked
inside.
3. Replace the cover.
When the headphone system stops oper-
ating properly, replace/recharge the bat-
teries. For the best performance and
longest life, we recommend RadioShack
Cat. No. 23-125/23-325.
Cautions:
• Always remove old or weak batteries.
Batteries can leak chemicals that can
destroy electronic parts.
• Dispose of old batteries promptly and
properly. Do not burn or bury them.
33-1144.fm Page 5 Tuesday, August 10, 1999 10:16 AM
