Optimus 2-5064 Owner'S Manual Download Page 12

12

Special Features

Erasing All the CDs from a Custom Group

With the CD changer stopped, repeatedly press 

MODE

 so 

CUSTOM

 and the 

number of the desired group light. Then press 

CLEAR

. (You cannot partially 

erase a custom group memory.)

Storing Your Best Tracks

You can save up to 20 of the tracks you like best in a special 

best

 memory, and 

then replay them at any time. To save a track in best memory, just press 

BEST

 

while that track is playing. 

BEST

 flashes three times. To play the tracks you 

have saved in best memory, press 

BEST

 while the changer is stopped. The CD 

changer plays in the reverse order; the last track you saved plays first.

Notes:

• The changer only remembers the last 20 tracks you stored in best mem-

ory.

• You cannot store the same track twice in succession.

• You cannot save a track from a CD that is in the single play slot into best 

memory.

• To clear a track from best memory, press 

CLEAR

 while that track is play-

ing.

• The best memory is kept even after you turn off the CD changer.

• The changer keeps the tracks in best memory for up to 2 days in the 

event of a power loss.

Scanning Previous CDs

The CD changer remembers the 20 most recently played CDs and lets you 
review and replay them in reverse order.

To review the CDs, press 

PREVIOUS

PREVIOUS SCAN

 flashes and the 

changer plays 10 seconds of the first track of each of the last 20 CDs you 
played, starting at 1 minute into the first track on each CD. To listen to an entire 
CD and cancel the previous scan function, press 

To stop the previous scan function, press  .

Notes:

• If a track is less than 1 minute long, previous scan starts at the beginning 

of the track.

• A CD in the single play slot is not included in the previous scan memory. 

Neither are any CDs played using random play, hi-lite scan, programmed 
play, and best selection.

• The previous scan memory remains stored even after you turn off the CD 

changer.

• The changer keeps the CDs stored in previous scan memory for up to 2 

days in the event of a power loss.

Using Hi-Lite Scan

To listen to 10 seconds from each CD, press 

HI-LITE

 while the changer is 

stopped or during normal play. 

DISC SCAN

 flashes and the changer plays 10 

seconds from each CD, starting at 1 minute into the first track.

To listen to 10 seconds from every track on all CDs, press 

HI-LITE

 twice 

while the changer is stopped or during normal, programmed, or favorite track 
play. 

SCAN

 flashes and the changer plays 10 seconds from each track, starting 

at 1 minute into each track.

Summary of Contents for 2-5064





















Reviews: