7
PREPARATION
Important: Complete all other con-
nections to the System 731 before
you connect it to power.
CONNECTING THE
SPEAKERS
1. Press open the pair of terminal
tabs marked
R/S / –
on
the back of the main System
731, then insert the right
speaker’s red wire into the red
(+) terminal and its black wire
into the black (–) terminal. Then
release the tabs.
Caution: To avoid damaging
your system and speakers,
never let the speaker wire’s bare
ends touch each other.
2. Repeat Step 1 to connect the left
speaker’s wires to the pair of ter-
minals marked
L/S / –
.
Speaker Placement
For the best stereo effect, place the
speakers so the distance between
them is the same as the distance be-
tween the listening area and the point
halfway between the speakers. You
might want to experiment with sever-
al locations to find the best one.
Notes:
• If the you place the speakers far
apart, you can improve the ste-
reo effect by angling the speak-
ers toward you.
• To increase the bass sound,
place the speakers in the corner
of the room, against the wall or
directly on the floor.
• To decrease the bass sound,
move the speakers slightly away
from the corner, increase the
distance between them, and/or
raise them 6 to 8 inches off the
floor. You can purchase speaker
stands at your local Radio
Shack store.
CONNECTING THE FM
ANTENNA
To connect the supplied FM antenna,
loosen the screw caps marked
FM
ANTENNA
/
300
Ω
on the back of the
System 731, slip the antenna’s
spade lugs onto the terminals, then
tighten the screw caps.
13-1278.fm Page 7 Wednesday, July 14, 1999 4:24 PM
