19
USING THE CD CHANGER
LOADING A CD
1. Press
CD
.
2. Press
OPEN/CLOSE
to open the
CD compartment.
Note: The CD carousel has
three trays, each labeled with a
number, but only two trays show
at a time when you open the CD
compartment.
3. Place a CD in either (or both) of
the exposed trays, label side up.
Note: To load a CD in the third
tray, press
CD SKIP
. The carou-
sel rotates, exposing the other
tray.
4. After you load the CDs, press
OPEN/CLOSE
to close the CD
compartment. The system dis-
plays the current tray number,
and the total number of tracks
and total playing time of the CD
in the tray.
PLAYING A CD
To play a CD, simply press
PLAY/
PAUSE
after you load it. The selected
CD begins to play from Track 1. The
display shows
, the current tray
number, the CD’s current track num-
ber, the track’s elapsed time, and the
current track number indicator flash-
es. The system plays all the loaded
CDs once.
Notes:
• After you load a CD, do not
press either
SKIP
.
or
before the track number indica-
tors appear on the display. Oth-
erwise
NO DISC
appears on the
display and you must reset the
CD player by pressing
OPEN/
CLOSE
twice (to open and then
close the CD compartment.)
• If a tray does not contain a CD,
the system skips that tray and
automatically plays the CD in
the next tray.
• To temporarily stop play, press
PLAY/PAUSE
. ap-pears, the
elapsed timer stops counting,
and the current track number
indicator flashes on the display.
To resume play, press
PLAY/
PAUSE
again.
To stop play, press
STOP
.
t
∇
∇
∇ ∇
y
13-1275.fm Page 19 Wednesday, July 14, 1999 3:59 PM
