Optimum ZL-6740, Operating Instructions Manual

Page: 12 / 14

12
Main features and structure:
The product has many functions such as temperature regulating,
Spraying, Dry Ironing, Steam, Strong steam, Self-Cleaning
Function,Anti-Calc Function,Anti-Drip function, LED light
Function etc. and is with characteristics: luxury shape, high
heat efficiency, easy using, good ironing result, work saving
and time saving, and so on.
Component Name:
A: Steam regulating Knob
B: Burst steam button
C: Spraying button
D: Indicator bulb
E: 360 degree swivel cord
F: Temperature regulating knob
G: Water tank
H: Soleplate
I: Spraying mouth
J: Cover of water filler
K: Self-clean button
L: LED Light
How to fill with water:
Make sure the iron is turned off and the power cord is
unplugged from the electrical outlet.
1. Set the ‘Variable’ steam knob to the ‘0’ position before filling
the iron with water.
2. Open the ‘Water Fill’ Opening and fill the Tank up to the
‘MAX’ Line on the tank.
3. The water level can be observed through the transparent
part of the tank, when iron placed vertically, in case of water
level becomes low, refill the tank, following the procedure
described in steps 1 to 3 above.
4. Pour out the remaining water after use.
Note:
Most tap water can be used in this iron. Do not use
water additives or substitute water such as linen
or scented water in the steam iron, they can sta­
in fabrics or damage the iron. Do not fill the water
more than the ‘MAX’ position.
How to use as dry iron:
1. Position the iron vertically.
2. Plug the iron.
3. Set Steam regulating Knob to MIN position.
4. Preheat the iron until the indicator light goes out.
Now dry ironing can begin.
How to use the spray:
Before using the spray feature, check the fabric label for
ironing instructions because some fabrics may be spotted or
stained with moisture.
The spray feature is particularly helpful for removing stubborn
wrinkles and where extra dampening is needed. The spray may
be use with steam or dry ironing. Simply pump the Spray Mist
knob when spray is desired.
How to use as steam iron:
Fill the iron as described in ‘ How to fill with water’.
1. Position the iron vertically and turn the Temperature Control
Dial to the steam position.
2. Plug the Cord into the electrical outlet.
3. Set the Temperature Control Dial to the steam position.
Steam Ironing is only possible when at higher temperature
settings indicated with ‘MAX’ mark; otherwise the water
will leak from the soleplate.
4. Preheat the iron until the indicator light goes out. The light
will turn off when the indicated setting reaches the correct
temperature.
5. Turn the Temperature regulating knob to the required setting
for different types of fabric.
Now steam ironing can begin.
How to use the burst of steam:
The burst of steam feature provides additional steam for
removing stubbom wrinkles. It may be used with steam or fry
ironing.
Press the Power Steam button to release the surge of steam.
Pressing the button several times may be necessary to prime the
surge system. Wait a few seconds for the steam to penetrate the
fabric before pressing the button again for more steam.
Note: For optimum steam quality, do not apply
more than three successive shots after the indica­
tor light goes off.
Anti-Calc Function:
The anti-calc function is a permanet system loacated inside the
water tank to eliminate impurities from the water and to reduce
the problems connected with limescale build-up.