Optimum WBL3 Instructions For Use Manual Download Page 7

Appendix

Version 1.0  dated 2018-04-04

Page 7

Translation of the original instructions

LED WBL3

GB

LED-WB

L3_G

B.

fm

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

®

Img.7-1:

LED lamp socket

8

Appendix

8.1

Liability claims/warranty

Besides the legal liability claims for defects of the customer towards the seller, the manufac-
turer of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not
grant any further warranties unless they are listed below or were promised as part of a single
contractual provision.

Liability or warranty claims are processed at OPTIMUM GmbH's discretion either 
directly or through one of its dealers. 
Any defective products or components of such products will either be repaired or 
replaced by components which are free from defects. Title to replaced products or 
components is transferred to OPTIMUM Maschinen Germany GmbH.

The automatically generated original proof of purchase which shows the date of purchase, 
the type of machine and the serial number, if applicable, is the precondition in order to 
assert liability or warranty claims. If the original proof of purchase is not presented, we are 
not able to perform any services. 

Defects resulting from the following circumstances are excluded from liability and warranty 
claims:
- Using the product beyond the technical options and proper use, in particular due to over-

straining of the machine.

- Any defects arising by one's own fault due to faulty operations or if the operating manual

is disregarded.

- Inattentive or incorrect handling and use of improper equipment
- Unauthorized modifications and repairs
- Insufficient installation and safeguarding of the machine
- Disregarding the installation requirements and conditions of use
- atmospheric discharges, overvoltage and lightning strokes as well as chemical influences

Neither are the following items covered by liability or warranty claims:
- Wearing parts and components which are subject to normal and intended wear, such as

V-belts, ball bearings, lighting, filters, seals, etc.

- Non reproducible software errors

Designation

Size

Item no.

Size

Item no.

LED lamp socket

Beam angle 30°

0335106230

Beam angle 45°

0335106245

Beam angle 60°

0335106260

Summary of Contents for WBL3











Reviews: