9
5.”Heating” button:
Heat-preservation function. The factory default has been set at 370C.
Usage: Press “Heating” button, the appliance will start to keep the temperature of the bowl at 370C. If
you want to change the heat preservation temperature, Please follow below steps:
1) Press “Heating” button;
2) Set the target temperature (300C-1200C);
3) Set the time (1second-90minutes) you want.
6.”Dough” button:
Automatic making dough function.
Usage: Add the flour and water in the bowl. Press this button under stand-by state, the appliance
start to making dough automatically at speed 3, and the set working time is 2 minutes. Sound “Beep”
will be heard while the time is left 5 seconds. When the time is up, the appliance stops running and
“Start/Stop” button light keeps flashing. “Start/Stop” button light will be out if you don’t perform any
operation in 5 seconds. All the settings are cleared.
7.”Start/Stop” button:
To start/stop the working. Press “Start/Stop” button, the current working will be stopped. When you
press it again, the stopped working will be recovered.
Tips: If you press “Start/Stop” button longer than 3 seconds under any working situation, the
appliance will go back to stand-by state. All your settings will be cleared.
9. “Speed” button:
Usage: Firstly press “Speed” button, “Speed” button lights. Secondly rotate the knob (8) to set the
speed (01-12) you want.
1
0. “Weight” button:
The maximum weight is 5000g. Weight range: 3-5000g.
Usage: Press “Weight” button, “Weight” button lights, LCD shows as “0000”. And then put the food in
the bowl, read the number shown on the LCD. That is the weight of the food added.
Tips: Press “Weight” button longer than 3 seconds, the appliance will exit from weighting function.
11. “Weight/Time” display:
denotes the weight of the food added, or the timer (range: 1 second-90minutes).
