16
FAULT CODES:
Code Status
Solution
E1
E2
E3
E4
The appliance needs to be sent to the
approved service centre for repair.
“E1” was shown on LCD, meanwhile
the light colour of “Start/Stop” button
(L) changes from green to red.
“E2” was shown on LCD, meanwhile
the light colour of “Start/Stop” button
(L) chang-es from green to red.
“E3” was shown on LCD, meanwhile
the light colour of “Start/Stop” button
(L) chang-es from green to red.
“E4” was shown on LCD, meanwhile
the light colour of “Start/Stop” button
(L) chang-es from green to red.
Take out the bowl and reinstall it according to
the operating instruc-tion. It needs to be sent
to the ap-proved service centre if it still doesn’t
work.
Take out the bowl, and reinstall it according to
the operating instruc-tion. It needs to be sent
to the ap-proved service centre if it still doesn’t
work.
Firstly power off, and then restart the appliance
after 1 hour. It needs to be sent to the approved
service centre if it still doesn’t work.
PROCESSING GUIDE
Flour
5
Speeds
Accessory
Butterfly (H)
Blade (D)
Food
Egg Whites
Maximum
Operation time
500g
3 eggs
300g
3 minutes
2 minutes
3
Water
CLEANING:
1. Before you clean the appliance, switch the appliance off and remove the plug from the socket.
2. Unscrew the screw ring and remove all parts of the attachment.
3. All the accessories can be cleaned in the dishwasher.
4. While using the appliance, always keep the contact pins at the bottom of the bowl clean and dry!
Wipe the contact pins at the bottom of the bowl with a dry cloth!
5. Never use pointed or sharp objects for cleaning as this may damage functional parts or affect the
safety of the appliance.
6. The blade is very sharp, please ensure to handle it with care.
7. Wash all parts in hot soapy water. Clean them immediately after use. Rinse them with clear hot
water and dry them immediately.
