13
• Do not use hair oil, grease, oil mixed with kerosene or any
solvent. As the solvent will evaporate and leave the thick oil
which may slow down the blades motion.
ADJUSTABLE LEVER
• The lever is conveniently located near your thumb (if you’re
right handed) so it can easily be adjusted while the clipper is
in your hand.
• The lever adds versatility to your clipper by allowing you
to gradually change the closeness of your cut without an
attachment comb.
• When the lever is in the uppermost position, the blades will
give you the closest cut and leave the hair very short. Pushing
the lever downward gradually increases the cutting length.
• In its lowest position, the lever will leave the hair
approximately the same length as a #1 comb.
• The lever will also extend the use of your blades since a
different cutting edge is used in each setting.
• In addition, if extremely heavy hair cutting has jammed the
blades, it will help you remove hair that has become wedged
between the two blades without removing the blades.
• While the clipper is running, rapidly move the lever from
"close cut" to "longer cut" a couple of times. Doing this each
time after you have finished using your clipper will help to
keep the blades clear of cut hair.
• If your clipper stops cutting and this does not help, your
cutting blade are dulled. Replace them with new blades.
CLEANING AND MAINTENANCE:
• The machine does not require any special maintenance. Just
follow the rules of use described in the instructions.
• Always remove the plug from the socket after cutting hair and
before cleaning.
• The housing of the device can be cleaned with a damp cloth.
Do not immerse the device in water or other liquids!
• After cutting, thoroughly clean the extra attachments and the
hair clipper with a brush.
• Do not coil the power cord around the clipper!
WARNING!
Do not use sharp objects, abrasive
pastes for cleaning, solvents and other strong
chemicals - their use may result device damage.
STORAGE
• Ensure the unit is completely cool and dry.
• Do not wrap the cord around the appliance, as this will cause
damage.
• Keep the appliance in a cool, dry place.
SPECIFICATION:
Power supply: 220-240 V
~
/ 50 Hz
Power:
10 W
Norm:
Class II
ECOLOGY – ENVIRONMENTAL PROTECTION
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste and
should not be disposed of into containers for such waste.
Obsolete or broken-down electrical device
should be
delivered to special designated collection points, organized by
local public administration, whose purpose is to collect recy-
clable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the
reclaiming of materials which the product is made of.
Weight: 0.51
℮
Close cut
Longer cut
