Operation
Version 1.0.1 dated 2017-11-16
Page 43
Translation of the original instructions
TX6222
GB
T
X
6222
_GB
_4.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
Follow rest
4.15
Bed insert
Remove the bed insert if the diameter of the workpiece turned is larger. By removing the bed
insert, the rotational diameter can be increased. The turning length is limited.
First detach the fastening screws and then pull out the dowel pins.
For re-assembly, proceed the other way around.
4.16
General operating instructions
4.16.1 Longitudinal turning
In the straight turning operation, the tool
feeds parallel to the axis of rotation of the
workpiece. The feed can be either manual
- by turning the handwheel on the lathe
saddle or the top slide - or by activating
the automatic feed. The cross feed for the
depth of cut is achieved using the cross
slide.
Img. 4-4:
Graphic: Longitudinal turning
13
11
3
Bed insert
Feed
In
fee
d
