OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 73
Original operating instructions
MF2 Vario
GB
8.4
Liability claims for defects / warranty
Beside the legal liability claims for defects of the customer towards the seller the manufacturer
of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not grant
any further warranties unless they are listed below or had been promised in the frame of a
individual contractual agreement.
The processing of the liability claims or of the warranty is performed as chosen by OPTIMUM
GmbH either directly or through one of its dealers.
Any defective products or components of such products will either be repaired or replaced by
components which are free from defects. The property of replaced products or components
passes on to OPTIMUM Maschinen Germany GmbH.
The automatically generated original proof of purchase which shows the date of purchase, the
type of machine and the serial number, if applicable, is the precondition in order to assert liabil-
ity or warranty claims. If the original proof of purchase is not presented, we are not able to per-
form any services.
Defects resulting from the following circumstances are excluded from liability and warranty
claims:
the following circumstances occurred:
- Using the product beyond the technical options and proper use, in particular due to over-
straining of the machine.
- Any defects arising by one's own fault due to faulty operations or if the operating manual
is disregarded.
- Inattentive or incorrect handling and use of improper equipment.
- Non-authorized modifications and repairs.
- Insufficient installation and safeguarding of the machine
- Disregarding the installation requirements and conditions of use.
- Atmospheric discharges, overvoltage and lightning strokes as well as chemical influ-
ences.
The following items are as well not subject to the liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such
as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors
Any services which OPTIMUM GmbH or one of its agents performs in order to fulfill in the frame
of an additional guarantee are neither an acceptance of the defects nor an acceptance of its
obligation to compensate. Such services do neither delay nor interrupt the warranty period.
Place of jurisdiction among traders is Bamberg.
If one of the above mentioned agreements is totally or partially inefficient and/or null, it is con-
sidered as agreed what is closest to the will of the warrantor and which remains in the frame-
work of the limits of liability and warranty which are predefined by this contract.
