OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.3.2 dated 2015-01-22
Page 9
Original operating instructions
DG20
US
All additional installations carried out by the operator must incorporate the safety
devices prescribed.
This is your responsibility as the operator!
"Safety devices“ on page 10
1.5
Qualification of personnel
1.5.1 Target group
This manual applies to
the operators,
the users,
the maintenance staff.
The warning notes refer to both operation and maintenance of the drill bit grinder.
Determine clearly and irrevocably who will be responsible for the different activities on the drill
bit grinder (operation, maintenance and repair).
Vague or unclear assignment of responsibilities constitute a safety hazard!
1.5.2 Authorized personnel
WARNING!
Incorrect use and maintenance of the drill bit grinder constitutes a danger for personnel,
objects and the environment.
Only authorized persons may operate the drill bit grinder!
The technical staff is authorized to operate and to maintain the drill bit grinder.
The operator must
Obligations of
the operator
train the staff,
instruct the staff in regular intervals (at least once a year) on
- monitoring all safety standards that apply to the machine,
- maintaining the operation,
- obtaining accredited technical guidelines,
check the knowledge of the staff,
document training / instructions,
require the staff to confirm participation in training / instruction by means of a signature,
check that the staff is aware of safety and dangers in the workplace and that they observe
the operating manual.
The user must
Obligations of
the user
have followed a training on the operation of the drill bit grinder,
know the function and performance,
before commissioning
- have read and understood the operating manual,
- be familiar with all safety devices and regulations.
Further
requirements
to the qualifi-
cation
For working on the following machine parts, additional requirements are being applied:
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, following measures are to be per-
formed in the following order.
disconnect all electrical power
secure against switching on
