OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.2.5 dated 2017-03-10
Page 44
Original operating instructions
DH32GSV
GB
4.12
Control panel DH 32 GSV
Img. 4-10: Operating elements on the control panel - version 1.1
Push button "threading"
In the thread cutting mode the engine automatically starts up according to a predefined path
over the drilling depth stop and automatically changes the turning direction as soon as the
predefined depth had been achieved. The screw-tap is drawn out of the workpiece.
Rotation direction push button
With start-up the spindle starts the rotation in a clockwise direction. A changing to "left-hand
motion" (counter-clockwise) is only possible with rotating spindle.
"Speed table - DH 32 GSV“ on page 47
Push button ON
The push button "ON"
switches on the rotation of the drilling spindle.
Push button OFF
The "push button OFF“
switches the rotation of the drilling spindle off.
Speed control dial
Infinitely variable speed adjustment.
Operation control light
The control lamp for operation on operating panel must flash up.
Emergency-stop button
Push button "ON"
Rotation direction push button
Left hand motion/ clockwise
rotation
Machine illumination ON / OFF
Rev counter
Speed control dial
Push button "OFF"
Push button "threading"
Drill depth scale
Coolant pump ON / OFF