Optimum OPTi drill DX 13V, Operating Manual, Page: 14 / 36

OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 1.0.1 dated 2016-04-25 Page 14 Original operating instructions
DX13V | DX15V GB
3 Assembly
3.1 Unpacking the machine
Transport the drilling machine in its packing crate near its final installation location with a lift
truck before unpacking it. If the packaging shows signs of possible transport damage, take the
necessary precautions not to damage the machine when unpacking it. If any damage is discov-
ered, the carrier and/or shipper must be notified immediately to be able to initiate the neces-
sary steps for a claim.
Inspect the machine completely and carefully, making sure that all materials, such as shipping
documents, manuals and accessories supplied with the machine have been received.
3.2 Transport
The machine can be transported with forklifts or lift trucks. The commonly accepted and local
regulations regarding machine transport apply.
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the
forklift truck or from the transport vehicle. Follow the instructions and information on
the transport box. Note the total weight of the drilling machine. Use only transport and
load suspension devices that can support the total weight of the drilling machine.
WARNING!
The use of unstable lifting and load suspension equipment that might break under load
can cause severe injuries or even death. Check that the lifting and load suspension gear
has sufficient load-bearing capacity and that it is in perfect condition. Fasten the loads
properly. Never walk under suspended loads!
3.3 Anchoring the Drill
DANGER!
Danger of crushing and overturning. The drilling machine must be installed by several
people.
Weight: DX13V - 51 kg, DX15V - 66 kg.

Check that the drilling machine foundation is horizontal with a spirit level.

Check that the foundation has sufficient load-bearing capacity and rigidity.

Anchor the machine base or the optional machine base onto the floor before positioning the
machine on it.
Centre of Gravity Without a Machine Base,

"DX13V Dimensions“ on page 12

"DX15V Dimensions“ on page 13
3.3.1 Centre of Gravity with an Optional Machine Base
CAUTION!
In order to provide the necessary stability of the machine, the machine must be
connected securely to its base. The machine base itself must be fastened firmly to the
floor.