26
g. After measurement, the monitor will turn off automatically
after 1 minute of no operation. Alternatively, you can press
the “START” button to turn off the monitor manually.
h. During measurement, you can press the “START” button to
turn off the monitor manually.
NOTE:
Please consult a health care professional for interpretation of
pressure measurements.
8. DISPLAYING STORED RESULTS
a. In Standby Mode, press “MEM” button to display the stored
results. The current memory bank will blink and the amount
of results in this bank will be displayed. Press “START” button
to change over to other bank. Confirm your selection by pres-
sing “MEM” button. The current bank can also be confirmed
automatically after 5 seconds with no operation. See picture
8-1.
b. After selecting the memory bank, the LCD will display the ave-
rage values in this bank. See picture 8-2. If no result stored,
LCD will show zeros. See picture 8-5.
c. Press “MEM” button, LCD will display the average value of all
the results which is measured from 5 o’clock to 9 o’clock in last
7 days in the current user memory zone.
See picture 8-3. If no result stored from 5 o’clock to 9 o’clock
in last 7 days, LCD will display “0” for blood pressure and pulse
rate.
