ESI-100 IP-PBX
4
3.1 Network Settings
The ESI-100 system includes a management, SIP, and RTP port. They are
10.10.157.11, 10.10.157.12, & 10.10.157.13 respectively and all utilized the /24
netmask. To modify network settings first right click the site name and connect to
Network/NSP
.
Navigate to
Program>F8 IP Programming>F82 Local Programming>F824 NSP
IP Programming
and enter the address of the management port under
NSP Private
IP Address
and the address of the Optimum Business Sip Trunk Adaptor under
NSP
Gateway IP Address
.
Next navigate to
Program>F8 IP Programming>F84 SIP Card Configuration
Programming
. Under
Card Type
what should be selected is
SIGNALING
. The
Primary
Processor IP
field is essentially the SIP port which will be used for signaling.
The IP address of the Optimum Business Sip Trunk Adaptor should be entered under
Gateway IP
. The
Primary Processor
(SIP IP) address can be entered in the
Public IP field
. The
Secondary Processor IP
field will contain the IP address of the
RTP port.
