OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
Version 1.0 dated 2015-03-31
Page 33
Original operating instructions
DPA22
GB
3.10
Tool data function
Creates up to 99 tool data sets in relation in the coordinate system.
Usage of the tool data function makes it possible to establish a specific relationship between
the tool data in the coordinate system and the displayed values.
INFORMATION
The saving function for tool data only when the reference mark function
is acti-
"Reference marker function“ on page 21.
Stored values remain saved even after loss of electric power.
Example:
Tool data no. 2 should lie at X = 1.000 and Y = 2.000 to the shown values.
Press the following keys in the order shown in order to input the values X = 1.000 and Y =
2.000 under tool data no. 2.
3.10.1 Recall of tool data
Example:
The tool data set no. 2 should be used at the currently displayed position.
Press the following keys in the order shown in order to use tool data set no. 2.
REF