2014
US
Page 14
Geared drill
B50 GSM
Version 1.0.3
22 / 07 / 2014
Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
1.10
Safety during operation
In the description of work with and on the geared drill we highlight the dangers specific to that
work.
WARNING!
Before activating the geared drill, double check that this will not
•
endanger other people
•
cause damage to equipment.
Avoid unsafe working practices:
Make sure your work does not endanger anyone.
The instructions in this manual must be observed during assembly, handling, maintenance
and repair.
Do not work on the geared drill if your concentration is reduced, for example, because you
are taking medication.
Observe the rules for preventing accidents issued by your association for the prevention of
occupational accidents and safety in the workplace or other inspection authorities.
Inform the inspector of any danger or failure.
Stay at the geared drill until all rotating parts have come to a halt.
Use prescribed protective equipment. Make sure to wear a well-fitting work suit and,
where necessary, a hairnet.
Do not use protective gloves during drilling work.
1.11
Safety during maintenance
Inform operators in good time of any repair and maintenance work.
Report all safety relevant changes or performances details of the geared drill. Document all
changes, have the operation manual changed accordingly and train the machine operators.
1.11.1
Disconnecting the geared drill and making it safe
Turn the machine off using the main switch before beginning any maintenance or repair work.
Use a padlock to prevent the switch being turned on without authorisation, and keep the key in a
safe place.
All machine components and hazardous voltages disconnected. Only the points marked with the
pictogram shown here are not included.
Place a warning sign on the machine.
1.11.2
Using lifting equipment
WARNING!
Use of unstable lifting and load suspension gear that breaks under load can cause very
serious injuries or even death.
Check that the lifting and load suspension gear
•
is of sufficient load capacity,
•
is in perfect condition.
Observe the rules for preventing accidents issued by your association for the prevention
of occupational accidents and safety in the workplace or other inspection authorities.
Fasten the loads properly. Never walk under suspended loads!
