Optimum B 24 H Operating Manual Download Page 25

Page: 25 / 100

OPTIMUM

M A S C H I N E N - G E R M A N Y

Assembly

Version 2.2.2 dated 2014-03-07

Page 25

Original operating instructions

B24H | B24HV | B28H | B28HV

3.3

Storage

ATTENTION!

In case of wrong and improper storage electrical and mechanical machine components
might get damaged and destroyed.

Store packed and unpacked parts only under the intended environmental conditions.

Follow the instructions and information on the transport case.

Consult Optimum Maschinen Germany GmbH if the machine and accessories are stored for
more than three months or are stored under different environmental conditions than those given
here.



"Information“ on page 6



Fragile goods
(Goods require careful handling)



Protect against moisture and humid environment



"Environmental conditions“ on page 19



Prescribed position of the packing case
(Marking of the top surface - arrows pointing to the
top)



Maximum stacking height

Example:not stackable - do not stack a second pack-
ing case
on top of the first packaging case

Summary of Contents for B 24 H





































































































Search results

Summary of Contents for B 24 H

Reviews:

Related manuals for B 24 H

Brands by name

Popular brands

Optimum B 24 H, Operating Manual

Search results

Summary of Contents for B 24 H

Reviews:

Related manuals for B 24 H

Brands by name

Popular brands