Maintenance
Version 1.2.3 - 2021-11-02
91
Translation of original instruction
S275N | S275NV
EN
S275
N
_S275
NV_G
B_5.
fm
Weekly
Drive sh
aft
Bearing
Oiling
every month
Worm gear
Inspection
INFORMATION
During the first few days in service, the helical gear
may become quite hot. If the temperature does not
exceed 70ºC, no further measures need be taken.
This running-in process can improve considerably if
a little Molykote G gear paste is added to the oil in
the helical gear before the machine is first used.
This reduces wear in the flanks of the teeth and
increases the useful service life of the gear.
As required
Ma
chin
e vic
e
Spindle
Lubricate the spindle of the work-holder vice
Annually
Dr
iv
e
Oil change
Unscrew the oil bleed screw at the bottom of the
helical gear. Use an adequate vessel with enough
capacity to collect the oil.
Open the filler cap for a better ventilation.
Use viscous gear oil, e.g. Mobil 629
Img.5-5:
Helical gear
INFORMATION
Have the metal band saw run for a few minutes
before starting the oil change. The oil warms up and
flows more easily through the outlet.
Interval
Where?
What?
How?