Optimum Medical HZ-8568, User Manual

Page: 53 / 64

53
17 16
DATA MANAGEMENT
If you did not get the correct measurement, you can delete
results by following steps below.
Delete the Records
A: Delete one record
1.Hold pressing “SET” button
for 3 seconds (Except the AVG)
when the monitor is in the
memory recall mode, the
flash display “dEL one+User
ID” will show.
2.Press and hold “Start/stop”
button to confirm deleting
and the monitor will display
“dEL donE+User ID” and then
turn off.
Note: To exit out the delete mode
press “Start/Stop” button shortly .
START
STOP
1.Hold pressing “MEM” button
for 3 seconds when the
monitor is in the memory
recall mode, the flash
display “dEL ALL+User
ID” will show.
2.Press and hold “Start/stop”
button to confirm deleting
and the monitor will display
“dEL donE+USER ID” and then
turn off.
3. If there is no record,
the right display will
show.
START
STOP
B: Delete all records
Note: To exit out the delete mode
press “Start/Stop” button shortly .
DATA MANAGEMENT