Maintenance
Version 1.0 - 2020-12-10
55
Translation of original operating instruction
GT22
EN
GT22_G
B_5
.f
m
Severe injuries of persons working on the machine,
Damage to the surface grinding machine.
Maintenance and repair work on the surface grinding machine must be carried out by
qualified technical personnel only.
Validation
Check and maintain all safety-relevant stop, control and measuring devices (validation).
Documentation
Record all tests and works in a operator's log resp. log book.
6.2.1
Preparation
WARNING!
Only carry out work on the surface grinding machine, if the master switch is switched off
and secured against restarting by means of a padlock.
6.2.2
Restarting
Before restarting, run a safety check.
WARNING!
Before starting the surface grinding machine, it is essential that you ensure that this
does not constitute a risk to personal safety or damage to the surface grinding machine.
6.3
Repair
6.3.1
Customer service technician
For any repair work request the assistance of an authorised customer service technician. Con-
tact your specialist dealer if you do not have customer service's information or contact Stürmer
Maschinen GmbH in Germany who can provide you with a specialist dealer's contact informa-
tion. Optionally, the company Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
can provide a customer service technician, however, the request for a customer service techni-
cian can only be made via your specialist dealer.
If the repairs are carried out by qualified technical personnel, they must follow the indications
given in these operating instructions.
Optimum Maschinen Germany GmbH accepts no liability nor does it guarantee against damage
and operating malfunctions resulting from failure to observe these operating instructions.
For repairs, only use
faultless and suitable tools only,
original parts or parts from series expressly authorised by Optimum Maschinen Germany
GmbH.
