Safety
Version 1.0 - 2020-12-10
13
Translation of original operating instruction
GT22
EN
GT22_G
B_1
.f
m
speed,
contact with rotating parts,
fatal electrocution,
pulling-in of clothes.
If, in exceptional cases (e.g. electrical repairs), you briefly bypass a control device, you must
constantly monitor the surface grinding machine during this time.
1.9.4
Prohibition, warning and mandatory signs
INFORMATION
All warning and mandatory signs must be legible. They must be checked regularly.
1.10
Safety check
Check the surface grinding machine at least once per shift. Inform the person responsible
immediately of any damage, defects or changes in the operating function.
Check all safety devices
at the beginning of each shift (when the machine is operated continuously),
once per day (during one-shift operation),
once per week (when operated occasionally),
after all maintenance and repair work.
Check whether the prohibition, warning and instruction signs and the markings on the surface
grinding machine
are legible (clean them, if necessary)
and complete (replace them, if necessary).
INFORMATION
Organise the checks according to the following table;
General check
Equipment
Check
OK
Protective housing on the grinding
wheel
Not damaged and functional
Signs, Markings
Installed and legible
Grinding wheel
Grinding wheel dressed ?
Grinding wheel with flange
Balanced ?
Date:
Checked by (signature):
Functional check
Equipment
Check
OK
Emergency stop button
The grinding wheel drive must switch off after actuating
the emergency stop switch.
Protective cover grinding wheel
Protective cover closed and screwed ?
Date:
Checked by (signature):
