optimax Ecopax CP422S2-3PH Operating Instructions Manual Download Page 3

Important Safety Notes

 >  All safety elements are designed for safe operation by one person, so
 

the machine must not be operated by more than one person at a time.

 
 >  Distances between the feed opening, the emergency-off switch etc. are designed 
 

for safe operation by adults. Children must be kept away from the machine if it is 

                               

connected to a power supply.

                               >  Before using this machine, tie back long hair and remove neckties, jewellery, 
                               

scarves or other loose items that may present a risk.

                               >  Do not insert fingers into the feed aperture when the machine is running.

                               >  In the event of an emergency, switch off the machine at the main switch or 
                               

emergency stop button and disconnect immediately from the mains power supply

                               >  Always ensure that the machine is disconnected from the mains at the power 
                               

socket before opening the housing for cleaning and maintenance work.

                               >  Repairs must only be carried out by a specialist.

                               > All Ecopax Shredders are manufactured to exceed the safety requirements outlined
                               

in BS EN ISO 13857:2008 ‘

Safety of machinery - Safety distances to prevent hazard

                               

zones being reached by upper and lower limbs

’.

                               

This British Standard is the UK implementation of EN ISO 13857:2008 and states 

                               

that an opening to the blades of 20mm height must have a minimum safety 

                               

distance from the blades to the opening of 120mm.

                               
                               

In line with our policy of providing premium quality equipment, Optimax shredders

                               

are now manufactured with a safety distance of 140mm.

Operating Instructions – Start-up

Electrical Connection

Connection to a 380/400V 50Hz three phase supply is required for operation of the
CP422S2-3PH. The CP422S2-3PH is supplied with a 2 metre power lead with a 16A Cekon
connector, which uses slow blow 16A replacement fuses.

®

OPTIMUM QUALITY MAXIMUM RELIABILITY

TM

5

4

C

P

4

2

2

S

2

-

3

P

H

 O

P

E

R

A

T

IN

G

 I

N

S

T

R

U

C

T

IO

N

S

Extract:  Illustration from the EN ISO 13857:2008 regulation.

Table 5 — Reaching through regular openings — Persons of 14 years of age and above

Additional 20mm
safety guard fitted
to all Optimax
Ecopax Shredders

20mm

Summary of Contents for Ecopax CP422S2-3PH







Reviews: