background image

  

Instructions for Use and maintenance OPTIMAL SP50 (0810) 

 

 

Warranty- / assignment certificate 

 

Warranty terms 
 

   

General about warranty 


 

The TREJON-warranty is limited by the conditions mentioned below and by the 
specific warranty terms issued by the supplier. These terms are in such cases 
attached to the operators manual for each machine. 

Validity of warranty 


 

Where the machine is bought for private use, the warranty provided by TREJON is 
valid for 12 months as of the date of purchase. 
In case of commercial use for 3 months. 

The warranty cover 


 

Damaged parts, which have broken down because of defective production 
operations of materials in course of normal use of the machine. 
The work-related expenditures, of the replacement of faulty spare part under the 
warranty, are compensated according to the official price-list of TREJON. 
TREJON may review the time for repair and adjust it tio a average time of other 
dealers to make similar repairs. 

The warranty does not 
cover 
 



Transport costs applicable to the machine or the parts. 
Travel costs. 
Possible costs that have been caused by the failure of the machine. 

 - 


 


 

If the machine has been modified by the owner. 
Faults, which have been caused by the machine’s normal war and tear and are not 
related to production faults. 
Inexperienced use or use of spare parts, which are not original. 
The warranty is not applicable to parts which are subject to wear, for example 
hoses, sealing, oil, belts, batteries, chains, knifes etc. 

Warranty procedures 


Before you start large warranty works, contact TREJON AB. 
In case you want the warranty to be valid, the TREJON warranty claim must be 
completed and returned to TREJON AB no later than within 3 weeks after the repair 
have been carried out. Return of exchanged parts should only be sent on demand. 

 
ATTENTION! 
 
 

   

The warranty becomes valid after the WARRANTY / ASSIGNMENT CERTIFICATE 
has been completed and returned to TREJON within 14 days after the date of 
purchase. 
 

 
 

Assignment certificate: 
 

The buyer of the machine hereby verifies with his/her signature of having admitted the manual and studied it and 
been provided with the necessary driving instructions and passed after-delivery control. 
 
 
PLEASE FILL IN! 
 

 

Product:

 

 Serialno: 

 

 
Salesman: 

 

 
Company: 

 

 
Signature of salesman: 

 

 
Date of purchase: 

 

 

 
Name of 
buyer: 

 

 
 
Telephone: 

 

 
Adress: 

 

 
Postcode: 

 

 
City: 

 

 
Country: 

 

 
Date: 

 

 
Signature of buyer: 

 

 

TREJON AB

 

- 14 - 

trejonindustries.se 

Summary of Contents for SP50

















Reviews: