TreV
oce EQ DSP
Series Manual rev2 9/21
Optimal Speaker Design | Brea, CA | osdaudio.com
Specifications
Warranty Information
Spec
TreVoce8 EQ DSP
TreVoce10 EQ DSP
TreVoce12 EQ DSP
Power
300W Dynamic
500W Dynamic
800W Dynamic
Active Woofer
8”
10”
12”
Passive Woofer
Dual 8”
Dual 10”
Dual 12”
Frequency
30-160 Hz
20-160 Hz
18 -160 Hz
Phase
0-180°
0-180°
0-180°
Voltage
100-120V AC / 220-240V AC 100-120V AC / 220-240V AC 100-120V AC / 220-240V AC
Inputs
Low Level
Hi Level / Low Level
Hi Level / Low Level / LFE
Dimensions
(WxHxD) 12 x 13.1 x 12 in
(WxHxD) 14.6 x 14.6 x 13 in (WxHxD) 16 x 15.4 x 15 in
All Optimal Speaker Design powered subwoofer products have a 2 Year Limited Warranty against defects in materials and
workmanship. Proof of purchase must accompany all claims. During the warranty period Optimal Speaker Design will replace any
defective part and correct any defect in workmanship without charge for either parts or labor Optimal Speaker Design may replace
returned speakers with a product of equal value and performance. In such cases, some modification to the mounting may be necessary
and are not Optimal Speaker Designs responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be
performed by Optimal Speaker Design. The unit must be returned to Optimal Speaker Design at the owner’s expense and with prior
written permission. Accidental damage and shipping damage are not considered defects, nor is damaged resulting from abuse or from
servicing performed by an agency or person not specifically authorized in writing by Optimal Speaker Design
Optimal Speaker Design sells products only through authorized dealers and distributors to ensure that customers obtain proper support
and service. Any Optimal Speaker Design product purchased from an unauthorized dealer or other source, including retailers, mail
over dealers and on-line sellers will not be honored or serviced under existing Optimal Speaker Design warranty policy. Any sale of
product by an unauthorized source or other manner not authorized by Optimal Speaker Design shall void the warranty on the applicable
product.
Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases,
repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at
[email protected] for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to Optimal
Speaker Design at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a
corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) • Any
products that have been altered or modified • Any product whose identifying number of decal, serial #, etc. has been altered, defaced or
removed • Normal wear and maintenance.
TreVoce Triple Sub Series manual rev2 short.indd 8
9/8/21 9:24 AM