manualshive.com logo in svg

Optimal Audio Cuboid 10, User Manual

Share
Download
Optimal Audio Cuboid 10 User Manual Download Page 6

Once loudspeaker position has been decided, affix 
wall section of wall bracket (A, B or C depending 
on Cuboid model) securely to a suitable wall 
mounting point.

Position loudspeaker cabinet section of wall bracket 
over the four M8 mounting points and secure with 
the four bolts from the back of the cabinet.

 

Remove M8 fixing bolts from the rear of the 
loudspeaker cabinet. 

Optional wall bracket mounting positions enable 
greater down-tilt, using the lower four M8 bolt 
position, or the loudspeaker can be mounted in 
landscape mode by rotating the bracket as shown: 
he loudspeaker to the bracket.

Wall mounting Cuboid 8, 10, 12 and 15 – Portrait or landscape

6/23

Cuboid

Loudspeakers

Loudspeakers

USER GUIDE

© 2022. Optimal Audio Group Ltd. (v2.2)

>

<

Introduction

Aiming/

coverage

Overview

Horizontal 

coverage

Wall mount

Connecting up

Ceiling mount

Matching 

speakers/amps

Grille removal

Accessories

Badge rotation

Specifications

Coverage

Horn rotation

Safety info

Summary of Contents for Cuboid 10
























Reviews:

No comments

Brands by name

Popular brands

Load more brands