Restoring Factory Default
This step could reset the factory defaults.
Please follow the procedure below,
1
．
Press Menu key, the display reads “PrInT”.
2
．
Press Tare key repeatedly until it reads “InITIA”.
3
．
Press Count/Enter key to confirm, the display reads “BUSY” and then
returns to weighing mode. Factory default setup is finished.
Backlight Setup
Follow the procedures below:
1
．
Press Menu key, the display reads “PrInT”.
2
．
Press Tare key repeatedly until it reads “bLgHT”, press Count/Enter to
confirm, the display reads “1 nIn” which indicates the backlight will be off in
1 minute.
3
．
Press Tare key repeatedly to choose the desired time, 1
、
2
、
3
、
5
、
10
、
15
、
30
、
60 minutes are available to choose from.
4
．
Press Count/Enter key to confirm and the balance returns to weighing
mode.
OPD-A Series
User Manual / Using Scale
11/15
Summary of Contents for OPD-A Series
Page 1: ...OPD A Series User Manual ...
