11
CALIBRATION SETTINGS
To enter calibration settings, follow the procedure below:
1. In weighing mode, make sure calibration switch is set to “ON”
2. The display will show “01 CSP” meaning you entered the calibration parameter code
●
Press
to enter the next step level
●
Follow the steps in the parameters to set up your calibration
3. Press
to display “02 CAL” General calibration
●
Follow the steps to calibrate your scale
4. Press
to display “03 CUo” Sensitivity calibration
●
Follow the steps to set filters and manage the sensitivity of your scale
5. When you are done with calibrating, make sure to turn the switch to “OFF”
6. The screen will display “End” , save the data and restart
02 CAL
Calibration
01 CSP
Calibration
Set-up
03 CUo
Sensitivity
Calibration
Weighing Mode
Save Data & Restart
Calibration switch set to “ON”
Calibration switch set to “OFF”
