Optim 14120134 Manual Download Page 4

4.

Before You Begin

This cleaner must be operated in accordance with these instructions and only 
used for domestic household cleaning to remove DRY dirt and dust from 
household carpets, flooring, walls and fabrics. This cleaner is not fit to be 
used as an industrial cleaner and will void the manufacturer’s warranty if used 
inappropriately. 

PLEASE READ THESE INSTRUCTIONS THOROUGHLY.

This will ensure you obtain full benefit from your new cleaner. Keep this 
Instruction Manual in a handy place for future reference.

IMPORTANT

 

Always switch off the cleaner before cleaning, when not in use, attempting any 
maintenance task, fitting or removing accessories. The charger must only be 
connected to an AC power supply at the voltage shown on the rating label. This 
cleaner should only be charged with the charger provided. This cleaner should 
only be used for its intended purpose as described in these instructions. 

PRECAUTIONARY MEASURES:

1.  Do not operate the vacuum cleaner too close to heaters, radiators, 

and other hot surfaces.

2.  Before inserting the power plug into the power supply, make sure 

your hand is dry.

3.   Before turning on the vacuum cleaner, remove any large or sharp 

objects from the floor or cleaning surface in order to prevent 
damage to the filter.

4. When removing the power plug from the power supply, do not use 

the power cable, gently pull the power plug from the power supply. 

5.  Do not use this vacuum cleaner to pick-up water or liquids.

Summary of Contents for 14120134

















Reviews: