4
3. Connections and Power-On Sequence
1. Connect the HD Component output from the Optilia HD Camera to HD Component In of
HD-CAP.
2. Connect the HDMI cable to HDMI out and HDMI input of the monitor. If you are
connecting to a HD-
TV please set the screen mode to “Auto Adjust”/ “Under Scan” from
the TVs menu system.
3. Connect the footswitch (optional item OP-006 401).
4. Insert the SD Card (SDHC Card up to 32GB, highest speed recommended).
5. Turn on the HD Camera.
6. Connect the power to the DC-IN of the HD-CAP.
Within few seconds Optilia logo is visible on the screen and red LED lights on. After another
few seconds, live image on the screen will be visible and LED should switch to blue before
using the buttons. To power off simply remove the power connector.
Note:
In ESD protected environment, connect the ground connection point of the HD-CAP to
the earth if needed with a M3 screw.
HD Component In
USB
HDMI Out
Footswitch
DC In
