Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
7-17
2015-03-27
Rev.C
Figure 7-28: Image of the curvature map
If the "Scout" window is open and you press the print symbol on the upper bar (1 in
Figure 7-28), it is possible to print the screen using the preset printer of the PC.
7.5
TOPO-ABERROMETRY [TOPO-ABERROMETRY]:
ACQUISITION OF IMAGES
Selecting [Topo-Aberrometry] on the initial screen will cause you to access the
combined aberrometry and topography function.
When entering topo-aberrometry, it is necessary to wait a few seconds for the
recalibration of the motors of the optics, which compensate for the refractive error
(
defocus)
and the accommodation
(fogging)
of the eye.
Press the
joystick
to initiate the acquisition, like the topography (section §7.4). On
the display will appear the live image of the patient’s eye as shown in Figure 7-29.
To stop it, press [Abort] in the upper left-hand corner.
Figure 7-29: Elements comprising the Topo-aberrometry screen
