Optika B-190 Manual Download Page 16

Microscopy 

Microscopes OPTIKA 

Réf : 
571 248 / 571 249 

ENGLISH

 15 

7  Recovery and recycling 

The appliance reports the symbol: 

 

This symbol means that the appliance can be a 
precious source of raw materials. Therefore, it 
must not be disposed of as waste, but separately 
collected for the recycling and the recovery of the 
materials it contained in it. Such materials, if 
improperly dispersed into the environment, can be 
harmful to the environment and to human health. 

 

The producer of the equipment, Jeulin, recovers, re-uses and recycles the raw 
materials contained in the equipment. Such recovery, however, needs your 
help. 

When, at the end of its operating life, you shall decide to dispose of the 
apparatus, do not try to open it, nor to use parts of it in ways other than 
reported in this Manual, but bring it back to the Distributor. The Distributor shall 
collect the apparatus free of charge. 

 

The recovery of the raw materials shall then take place in accordance with the 
European Directive 2002 / 96/ EC and all other relevant Directives. Never 
disassemble, nor dispose of as waste, apparatus reporting the “crossed bin” 
symbol indicated above. 

 

8 After-Sales 

Service 

This material is under a two year warranty and should be returned to our 
stores in the event of any defects. 

For any repairs, adjustments or spare parts, please contact: 

 

JEULIN - TECHNICAL SUPPORT 

Rue Jacques Monod 

BP 1900 

27 019 EVREUX CEDEX France 

 

+33 (0)2 32 29 40 50

 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for B-190


















Reviews: