OPTIKA MICROSCOPES B-150D Operation Manual Download Page 3

Page 3

This microscope is a scientific precision instrument designed to last for many years with a minimum of main

-

tenance. It is built to high optical and mechanical standards and to withstand daily use.
Optika reminds you that this manual contains important information on safety and maintenance, and that it 
must therefore be made accessible to the instrument users.
Optika declines any responsibility deriving from instrument uses that do not comply with this ma-nual.

  

Safety guidelines

This manual contains important information and warnings regarding safety about installation, use and 
maintenance of the microscope. Please read this manual carefully before using the equipment. To 
ensure safe use, the user must read and follow all instructions in this manual. OPTIKA products are 
designed for safe use in normal operating conditions. The equipment and accessories described in 
the manual are manufactured and tested according to industry standards for safety instrumentation 
laboratory. Misuse can cause personal injury or damage to the instrument. Keep this manual at hand 
close to the instrument, for an easy consultation. 

 

Electrical safety

Before connecting the power cord to wall outlet, ensure that your mains voltage for your region corre

-

sponds to the voltage supply of the instrument, and that the illuminator’s switch is in position OFF. The 
user must observe the safety regulations in force in his region. The instrument is equipped with CE sa

-

fety marking, in any case the user has full responsibility concerning the safe use of that instrument. 

 

Warning/Caution symbols used in this manual

The user should be aware of safety aspects when using the instrument. Warning or hazard symbols 
are shown below. These symbols are used in this manual. 

The instructions on this symbol to avoid possible severe personal injuries.

Warning of use; the incorrect operation on the instrument can cause damages to the 
person or instrument. 

Possibility of electric shock. 

Attention: high temperature surfaces. Avoid direct contact.  

Technical notes or usage tips.

SAFETY GUIDELINES

Summary of Contents for B-150D

































Reviews: