Opticum X80 HDMI Quick Start Manual Download Page 8

 Environment protection  

Attention!

 

Your product Is marked  with this symbol. It means that used electrical and electronic products 

should not be mixed with general household waste. There is a separate collection system for these 

products. 

Information on Disposal for Users (private households) in the European Union. 

Used electrical and 

electronic equipment must be treated separately and In accordance with legislation that requires 

proper treatment, recovery and recycling of used electrical and electronic equipment. 

Following the implementation by member states, private households within the EU states may return their used 

electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local 

retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your 

local authority for further details. 
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately 

beforehand according to local requirements. 
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery 

and recycling and thus prevent potential negative effects on the environment and human health which could otherwise 

arise due to inappropriate waste handling. 

Information on Disposal for Business Users 
In the European Union. 

If the product is used for business purposes and you want to discard It: Please contact your 

dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-

back and recycling Small products (and small amounts) might be taken back by your local collection facilities, 

In other Countries outside the EU. 

If you wish to discard of this product, please contact your local authorities and ask 

for the correct method of disposal. 

 Declaration of conformity  

 Technical specification 

The manufacturer herewith declares the conformity of 

that product with the following directives and 

standards: 

Low Voltage Directive 2006/95/EC 

EN 60065:2002+A1:2006+A11:2008 

EMC Directive 2004/108/EC 

EN 55 013:2001+A1:2003+A2:2006 

EN 55 020:2007 

EN 61 000-3-2:2006+A1:2009+A2:2009 

EN 61 000-3-3:2008 

Model: Digital Satellite Receiver DVB-S 
 

Input frequency range: 

950-2150MHz  

RF Input connector: 

IEC169-24, Female 

Input impedance: 

75Ω 

Waveform: 

QPSK (SCPC, MCPC) 

Video decoding: 

MPEG2

(M P@ M L)

 

Video resolution: 

PAL 576, NTSC 480 

Audio decoding: 

MPEG-1, 2 Layer 1 & 2 

Audio track: 

Stereo, Left, Right 

Video/Audio connector: 

HDMI, SCART, Coaxial 

digital audio 

Other connectors: 

RS232, 12V/50mA 

Rated voltage: 

~ 230V

50Hz

 

Rated consumption: 

6 W  

Standby consumption: 

< 1 W 

Operating  temperature: 

5-40

 

Operating humidity: 

<95%  

Net weight: 

~0,3 kg 

Receiver measurements: 

180 mm × 90 mm × 42 mm 

 

Weight and dimensions are not absolutely exact 

values. Specifications are subject to change (by 

manufacturer) without notice. 

Summary of Contents for X80 HDMI









Reviews: