9
display the help menu to
Select
,
Add
,
Delete
or
edit
the transponder.
3.3 Antenna Setting for Motor
Menu->INSTALLATION
->Motor Mode->DiSEqC1.2&USALS
Move the cursor to
Motor Mode,
Select
DiSEqC 1.2
or
USALS
using
the
VOL+/VOL-
button
.
DiSEqC 1.2
: General motor antenna using DiSEqC 1.2.
USALS
: Motor antenna using USALS.
1.
Position auto
: Press the
VOL+/VOL-
button, the motor will drive
automatically until it gets the signal.
2
.
Continuously move
: The motor can drive only when you hold on
pressing the
VOL+/VOL-
button.
3
.
Move steps
: Input the number to set the driving step and press the
VOL+/VOL-
button, the motor will drive several steps.
4. Limit set
: You can set the maximum motor limit for both
East
and
West
to prevent damage to the antenna. W hen you set
Disable
the
Motor limit setting is released.
5. Command Type:
A).
Save Position
: Save current position of Motor.
B).
Go to Position
: Drive Motor to the position which you saved
previous.
C).
Go to Reference
: Drive Motor to zero point.
D).
Go to XX:
Drive
Motor according to
USALS
Setup
Menu->Installation->Motor
Mode
If you set the
Motor Mode
to
USALS
, you need set the
longitude and the latitude in
