Opticum AX LION NS, User Manual

Page: 25 / 49

4.1 First time installation
When you turn on the receiver for the first time or after restoring it to factory
settings,the "First time installation
R
menu will appear on the TV screen.
Installation Guide
Country Poland
FTA Only FTA
Search Mode DVB-T2
Antenna Power Off
Channel Search
EXIT E>ul
+
MOVG
1. Select items from the vertical menu list using [CH
+/-]
buttons.
The [VOL
◄ / ►]
buttons allow you to select a desired value for the selected item.
2. Select "OSD Language".
3. Select the required section and make the necessary settings.
4. Press [OK] in the "Channel Search" section to start the channel search in automatic mode.
5. Soon as the search is complete,the receiver will automatically switch to the viewing mode.
Press the [OK] button to call up the channel list created during search.Using [CH+/ -].select the
desired channel and press [OK] to watch it.
If the "First time installation" menu is not displayed:
6. Press the [MENU] button and select "System".Using the [CH + / CH -I buttons. select "
Restore Factory settings" and press the [OK] key to restore all receiver settings to the factory
settings.The default password value is 000000.The "First Time Installation" procedure must be
performed on first using or after updating the software.
7. After successfully restoring factory settings.the "First installation" menu will be displayed.
Follow steps 1 through 4 above.
4.2 Search for channels
Select "Search" from the menu.
Using this menu.you can search
for the channels again.
Select a search mode:
- DVB-T2
(digital terrestrial television)
• DVB-C
(cable television)
- FTAOnly
FTA()rty
="
� J:,i:
(option: search only free channels or search all channels).
Search
®
c1
Auto Search: Automatically searches for all available channels.
,_
@
◊
+-