Getting Started
Your MM3 travelscope will bring a new dimension to long range observation bringing far away subjects into clear
and sharp focus.
1. To minimize image shake caused by the high magnification, the instrument should be supported using a suitable
tripod or mount.
2. Connect the fieldscope to the tripod or mount using the tripod socket located on the underside of the tripod sleeve.
3. Make sure the eyepiece is attached securely. The retractable rubber eyecup should be used in the down position
when wearing glasses. This ensures the maximum available field of view is obtained. Be sure to return the
eyecup to the up position if you or anybody else wants to view without glasses.
4. To focus, locate the subject in the center of the field of view and rotate the focus wheel until the subject comes
into sharp focus. At high magnifications when depth of focus is shorter use the fine focus adjustment for greater
accuracy.
5. If you are using a variable magnification or zoom eyepiece set the magnification to minimum when trying
to locate your subject, only zooming once the subject is centered. With some eyepieces a small amount of
refocusing may be required as the zoom is adjusted.
WARNING. Never under any circumstances use a fieldscope to view the sun. Doing so will cause serious damage
to your eyes.
Eyepieces
Eyepieces • SDLv2 • HDF
Product Code
Magnification
Eye Relief (mm)
40936M
15-45x
20-18
40810M
17xWW
22
40831M
23xWW
16
40862M
15-45x
22-17
