rS-2006-QuICK Start guIde
rS-2006-QuICK Start guIde
SteP 1 - SCaN Bluetooth Mode
Scan the Bluetooth Default barcode that matches
the connection method you wish to use,
hId
(recom-
mended) or
SPP
. If you enable the
IoS KeyBoard
toggle
feature by scanning the
eNaBle
barcode,
you will also be able to toggle the on-screen keyboard
of an iOS device by tapping the Clear/Function key.
SteP 2 - hold Clear/FuNCtIoN Key For 5 SeC.
Hold the RS-2006’s Clear/Function key for 5 seconds
until it beeps and begins to flash blue. The RS-2006
is now discoverable by your host device. This can be
cancelled at any time by holding the Clear/Function
key for another 5 seconds.
SteP 3 - PerForM Bluetooth SearCh oN hoSt
Use the Bluetooth interface on your host device to
search for and select the RS-2006. The RS-2006 will
beep and the LED will flash blue slower than before
indicating pairing was successful. If you are pairing in
Bluetooth-SPP mode, the RS-2006 will complete the
pairing process as soon as you launch an appropriate
application and open the serial port created by your
Bluetooth software.
For information about your RS-2006, including
detailed setup instructions, downloads and more,
visit us at:
www.opticonusa.com/start/opn
or
www.opticon.com/service-and-support.aspx
0
1
2
3
4
5
6
7
8
9
End
QUICK STaRT InSTRUCTIOnS