S
UPPLEMENT
PHL2700
TERMINAL
/ RF-ID
FEATURE
4
RF-ID
SUPPLEMENT
SCANNING
4
Depending on the user application that is
running, the terminal can use the RF-ID
technology for reading a RF-ID tag or for a
combination of reading and writing.
The terminal will detect, read, and write
the RF-ID tag in the way as defined by the
user.
- How to position the terminal
The read direction must be perpendicular
to the plane surface of the tag, as shown in
the scan position illustration.
- How to read the RF-ID tag
Point the nose of the terminal on the tag.
Note that the maximum reading distance
depends on the type of tag.
When a tag is not responding to the
terminal move the nose to another location
of the tag.
- How to write the RF-ID tag
Make sure the tag will not move and hold
the terminal stable for the time that it is
writing. If the tag moves out of the antenna
field before the writing is completed, the
writing operation will fail.
- RF-ID tag reading/writing problems
Reduce the distance between the tag
and the terminal.
Point the terminal to the edge of the
tag.
Make sure there is only one tag in the
reading range.
ca. 90º
scan position
