Opticon
OPR 2001
Specifications Manual
38
15.3. Auto Trigger Options
15.3.1.
Auto Trigger Sensor
The product has an optional auto trigger setting, which starts barcode reading
automatically by using sensor detection. The scanner starts barcode reading after
detecting reflection from the surface when the auto trigger is used.
Auto trigger distance: 50 ±10 mm from the edge of the scanner.
Conditions
Moving Speed:
100 ±10 mm/s (the moving direction is not specified)
Angle:
Skew angle, excluding Pitch Angle and Dead Zone, specified
in section 7.3 Pitch, Skew and Tilt.
Environmental Temperature
and Humidity:
Room temperature and humidity
Environmental Illuminance:
500 to 900 lx
Conditions for the auto
trigger:
1. Barcode sheet: OPTOELECTRONICS Test Sheet (white)
Background: OPTOELECTRONICS Test Sheet (black)
2. Barcode sheet: OPTOELECTRONICS Test Sheet (black)
Background: OPTOELECTRONICS Test Sheet (white)
Figure 27: Auto trigger operation
Auto trigger can be enabled in 2 ways:
•
Stand detection mode: This option enables auto trigger automatically in case
the scanner is inserted into the stand.
•
Normal auto trigger mode.
*Descriptions in ( ) show menu IDs.
