OPN-3200i
Specifications Manual
14
8.8. Auto Trigger
When the scanner is placed in a dedicated stand (sold separately) which contains a magnet, it can
detect this magnet and enters auto trigger mode. The scanner starts scanning automatically when it
detects a change in brightness that occurs when a bar code label is presented in front of it.
8.8.1. Stand Detection
“Stand detection - Auto trigger flow”
Figure 7: Stand Detection Flow
* The dedicated stand is an optional accessory that can be purchased separately.
* The stand detection mode is disabled by default. It must be enabled to be used.
8.8.2. Auto Trigger Operation
The scanner should be triggered when a gray-colored paper is presented in front of a black-
colored background paper. The scanner should also be triggered when a black-colored
paper is presented in front of a gray-colored background paper.
<Conditions>
Paper
: Black paper from Glory: Black 010010016
: Gray paper from Glory: Silver-gray 010010016
Ambient light
: 500 ~ 1000 lx
Moving speed of paper
: 2 m/s or slower
Temperature / Humidity
: Room temperature / room humidity
Figure 8: Auto Trigger
Is Stand Detection
mode “*4” enabled?
Auto Trigger
Yes
Yes
No
Manual Trigger
No
Is the scanner
in the stand?
Paper
Background
Detection range
