19
ESL User Manual
5.4 Configuring ESLs
Besides sending images to the ESL, there are a number of configurations that can be made in the
ESLs to control, customize and to regulate power consumption.
To edit configurations of an ESL, go to the base station tab to which the ESL is currently linked
and right click on the ESL. After doing so, a settings dialog should appear, showing the current
status and settings of that ESL. (If the base station has not yet received the settings from this ESL,
then it will automatically request the settings the next time the ESL sends a poll for data.)
To edit configurations, check “Edit Settings” in the left bottom corner. After that, there will be five
configurations that can be edited. In following sections, these configurations will be described:
•
Associate Interval
•
Poll info ratio
•
Poll interval
•
Poll timeout
•
Scan channels
To edit multiple ESLs at the same time, press the shift- or ctrl-key in the base station tab to select
and configure multiple ESLs at the same.
