opticis Stretch LHM2-P Series, User Manual

Page: 4 / 5

Troubleshooting
The display shows black screen.
Ensure that the HDMI ports are firmly plugged into the HDMI source and
display. Ensure that the TX and RX modules are plugged correctly to the
HDMI source and display respectively, the cable guides which side to insert.
Check if the HDMI source and display are powered on and properly booted.
Reset the system by de-plugging and re-plugging the TX HDMI port or RX
HDMI port.
Re-boot up the system while connecting the optical HDMI cable system.
Check if the cable or its jacket is not physically damaged.
Check if the cable is not bent or kinked.
Screen is distorted or displays noises.
Ensure connections of both plugs while disconnecting and reconnecting the
optical HDMI cables.
Maintenance
No special maintenance is required for the optical HDMI cables. Ensure that
the cables and power modules are stored or used in a benign environment
free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis.
Technical Support and Service
General Inquiries: Info@opticisusa.com
Tech Support: support@opticisusa.com
Visit us at www.opticisusa.com to learn more about Opticis products
1-4 Troubleshooting, Maintenance, Technical Support
Product Specifications
LHM2-Pxxx, HDMI 2.0 Detachable Active Optical Cable
 Supports HDMI 2.0 Standards
 Extends up to 4K (4096x2160) at 60Hz (RGB & YCbCr : 4:4:4)
 Transmits HDMI 2.0 data up to 100m(328feet) over hybrid cable
 Offers perfect flexibility during installation by separating HDMI
connector from cable
 Cable Options:
-LHM2-PPxx : Plenum Jacket
-LHM2-PLxx: LSZH Jacket
-LHM2-PTxx:TPU Jacket
*Note: “xx” stands for the length of the cable.
Ex: 10m of LHM2-PP

LHM2-PP10
(“A0” for 100m)
 Operates by external USB power on the display(RX) side
 Provides USB power cable on display source(TX) side for
insufficient power supply(optional)
 Supports 3D contents transmission
 Complies with CEC, EDID and HDCP 2.2
 Supports HDR at 10 bit or 12 bit speeds respectively within its
maximum bandwidth, 18Gbps
 Tensile load: 500N

Minimum bending radius: 6mm

Outer diameter of cable: 3.4mm (±0.2)
 Mechanical specifications of TX and RX module parts

Dimensions: 71.7mm / 24.2mm / 10.1mm (L/W/H)
 Environmental Specifications

Operating temperature: 0°C to 50°C

Storage temperature: - 30°C to 70°C

Humidity: 5% to 85%
 Certifications: CE / FCC
1-5 Product Specifications