Product Specifications
M5-2C2 Digital Vide/Audio and Serial I/O Optical Extender
Compliance with DVI standard:
supports DVI 1.0 of DDWG, using
fiber-optic communication links and DDC2B.
Compliance with HDCP :
supports HDCP
Extension limit:
50m (160feet) at WUGA (1,900x1,200) 24bit color at 60Hz refresh
rate for PC and 1080p for HDTV.
Audio:
Input - Selectable RCA, S/PDIF(coaxial) or S/PDIF(optic)
Output - RCA, S/PDIF(coaxial) and S/PDIF(optic)
RS232C:
supports D-sub 9 Pin connectors for RS232C.
Cable Connection:
The transmitter and receiver boxes of M5-2C2
have two(2) RJ45 receptacles connected to two(2) CAT5 or CAT6
cables.
Mechanical specifications of Uplink and Downlink boxes
Dimensions:
240mm / 130mm / 31mm (W/H/D)
Weight:
440
±
10 gram for each of Uplink and Downlink
module.
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: - 10°C to 70°C
AC/DC Power Adapter
Power Input:
Universal AC 85-264V, 50/60Hz, AC power cord with
power jack.
Power Output:
+12 V, 3.0 A SMPS DC-power Adapter
Cord DC Jack & length:
Core is 12 V and outer cylinder is GND.
Length is 18.5 cm
AC Cord length: 1.8m
Certification
:
PSE, UL, cUL, FCC, CE, TUV-GS
1-9 Product Specifications
Troubleshooting
The display displays only black screen.
•
Check that all AC and DC plugs and jacks used by external power
supplies (both Opticis and others) are firmly connected.
•
Ensure that power LED lit ON.
•
Ensure that the Uplink and Downlink modules connected correctly to
the PC and display, respectively.
•
Check if the PC and display are powered on and properly booted.
•
Reset the M5-2C2-TR using Reset button on Uplink and Downlink
modules.
•
Test to make sure the modules are working normally with short CAT5
or CAT6 cable 5~10m. If you get the good video at the short length,
you have to set the correct booster and EQ mode as guided on page
1-6.
Screen is distorted or displays noises.
•
Reset the M5-2C2 using Reset button on Uplink and Downlink
modules.
•
Reset the system.
•
Test to make sure the modules are working normally with short CAT5
or CAT6 cable 5~10m. If you get the good video at the short length,
you have to set the correct booster and EQ mode as guided on page
1-6.
Maintenance
No special maintenance is required for this product. Ensure that this product
is stored or used in a benign environment free from liquid or dirt
contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis or its authorized distributor.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email
or visit its
website at
www.opticis.com
.
1-8 Troubleshooting, Maintenance, Technical Support
