Cautions
Connect the device to the AC adapter connected to a medical grade power cord
ensuring the power cord is plugged into a grounded power outlet to achieve
grounding reliability.
Do not sterilize the device, as the delicate electronics cannot withstand this
procedure.
Use only the proprietary surgical display power supply for the display. Completely
secure the connection between the DC power cord and the extension cord.
Never operate the device immediately after transportation from a cold location to
a warm location.
To connect to a universal power supply, use an attachment plug appropriate for
the power outlet, as outlined in the “Technical Specifications” section of this
manual.
Unplug the device if it is not to be used for an extended period of time. To
disconnect the cord, unscrew the plug first, then pull the cord out by the plug.
Never pull the cord itself.
Allow adequate air circulation to prevent internal heat buildup. Do not place the
device on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies)
that may block the ventilation slots. The device is cooled by natural convection
and has no fan.
Pay close attention to the cleaning instructions in this manual. A deviation may
cause damage.
Do not install the device near sunlight, excessive dust, mechanical vibration, or
shock.
Do not operate with the glass device screen facing downward.
Handle the device with care.
Changes or modifications not expressly approved by the party responsible for
compliance could be void the user’s authority to operate the device.
Place and fix device on the places where the easy plug and unplug of power
supply can be done.
To stop the operation of device immediately and safely, just unplug the power
supply from the device.
1-3 Cautions
About Your Device
This HDMI 2.0 and DisplayPort 1.2 to HDMI 2.0 optical converter, HDHF-4K
receives HDMI, DisplayPort into optical HDMI signal and transmits it up to
200m(OM3) (656ft) over one (1) multi-mode fiber without any data compression
or latency. To recover electrical HDMI signal, one (1) fiber HDMI receiver,
HDFX-500-RX or HDFX-700-RX should be used at the display end. And HDFX-
700-Rx should be compatible version of HDFX-500-Rx not ARC support version.
HDMI 2.0 and DisplayPort 1.2 to HDMI 2.0 optical converter,
HDHF-4K
1-4 About your device
