background image

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Warranty Information

 

 

1 (One) Year Warranty 

Opticis warrants this optical HDMI module to be free from defects in workman
ship and materials, under normal use and service, for a period of one (1) year 
from the date of purchase from Opticis or its authorized resellers. 
 
If a product does not work as warranted during the applicable warranty period,
 Opticis shall, at its option and expense, repair the defective product or part, d
eliver to customer an equivalent product or part to replace the defective item, 
or refund to customer the purchase price paid for the defective product.  
 
All products that are replaced will become the property of Opticis.  
 
Replacement products may be new or reconditioned. 
 
Any replaced or repaired product or part has a ninety (90) day warranty or the
 reminder of the initial warranty period, whichever is longer. 
 
Opticis shall not be responsible for any software, firmware, information, or me
mory data of customer contained in, stored on, or integrated with any product
s returned to Opticis for repair under warranty or not. 
 

Warranty Limitation and Exclusion 

Opticis shall have no further obligation under the foregoing limited warranty if 
the  product  has  been  damaged  due  to  abuse,  misuse,  neglect,  accident, 
unusual  physical  or  electrical  stress,  unauthorized  modifications,  tampering, 
alterations,  or  service  other  than  by  Opticis  or  its  authorized  agents,  causes 
other  than  from  ordinary  use  or  failure  to  properly  use  the  product  in  the 
application for which said product is intended. 
 

Dispose of Old Electrical & Electronic Equipment 

(Applicable in the European Union and other European countries with separate systems) 

 

This  symbol  on  the  product  or  on  its  packaging  indicates  that  this 
product  shall  not  be  treated  as  household  waste.  Instead  it  shall  be 
handed  over  to  the  applicable  collection  point  for  the  recycling  of 
electrical  and  electronic  equipment.  By  ensuring  this  product  is 
disposed  of  correctly,  you  will  help  prevent  potential  negative 
consequences  for  the  environment  and  human  health,  which  could 
otherwise be caused by inappropriate waste handling of this product.

 

The  recycling  of  materials  will  help  to  conserve  natural  resources.  For  more  detailed 
information  about  recycling  of  this  product,  please  contact  your  local  city  office,  your 
household waste disposal service or the shop where you purchased the product.

 

 

 

1-11 Warranty Information 

FCC/CE Statement for regulation of Electro-magnetic 
emission 
 

This  device  complies  with  part  15  of  FCC  Rules.  Operation  is  subject  to  the 
following  two  conditions:  (1)  this  device  may  not  cause  harmful  interference, 
and  (2)  this  device  must  accept  any  interference  received,  including 
interference  that  may  cause  undesired  operation.  This  equipment  has  been 
tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, 
pursuant  to  part  15  and  2  of  FCC  Rules,  EN  55022/55024/61000-3  for  CE 
certification.  These  limits  are  designed  to  provide  reasonable  protection 
against  harmful interference  when the equipment is operated  in a residential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and. if not installed and used in accordance with the instruction guide, 
may  cause  harmful  interference  to  radio  communications.  However,  there  is 
no guarantee that interference will not occur in a particular installation. If this 
equipment  does  cause  harmful  interference  to  radio  or  television  reception, 
which  can  be  determined  by  turning  the  equipment  off  and  on,  the  user  is 
encouraged  to try to correct the  interference by one  or more of the following 
measures: 
 

 

Re-orient or relocate the receiving antenna. 

 

Increase the separation between the equipment and the receiver. 

 

Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to 
which the receiver is connected. 

 

Consult a service representative for help. 

 
Properly shielded and grounded cables and connectors must be used in order 
to  comply  with  FCC/CE  emission  limits.  Changes  or  modifications  not 
expressly  approved  by  the  party  responsible  for  compliance  could  void  the 
user s authority to operate the equipment.

 

 

Certification for Safety 

 
The extension system is certified pursuant to IEC60065 and its AC/DC power 
adapter is certified by KC & FCC & CE. 

 
Certification of Eye Safety 

 

This  laser  product  is  inside  implemented  by  using  850nm  VCSEL  (Vertical 
Cavity  Surface  Emitting  Laser)  Transceivers,  manufactured  by  Opticis  Co., 
Ltd.,  which  are  all  certified  by  CDRH/FDA  referred  in  Accession  Number 
0210774 as classified in LASER Class 1 Eye Safety. 
 

 
 
 
 
1-12 Regulatory Statements 

Summary of Contents for HDFX-100-TR









Reviews: