4
5. Connection diagram
6. System installation requirements
6.1 Hardware
Devices need to have the DVI interface and support DVI resolution
6.2 Software
There is no special requests as long as the DVI image controller has been well installed.
6.3 AC/DC Suggestions
Transmitter has the power protection system, users can use other adapters which can
provide 5V power supply, for the receiver should use the adapter which come together in
the packing.
7. Operation and instruction
Note: Please follow the following steps, otherwise it may not working.
Step 1:
EDID learning/ Coding: Please power on the display first, then plug the transmitter to
the display and power on with the 5V1A power adapter(Note: Need to get the
transmitter connected with the display first, then power on the transmitter), then the
LED indicator on the opposite side will light up in red, and the LED indicator on the up
side will light up in blue and last for 8-10 seconds and off, it means the EDID has
learned successfully; If the indicator after lighting up 8-10 second, and flicking for 3
times then off, it means the EDID learning was failed.
Note: If need to exchange the display, please remember to repeat the step 1
Step 2:
Plug the transmitter to DVI port of the input sources. Make sure to power the
transmitter and the red LED indicator is lighting up.
Note: Please don
’
t use other power adapters to have the perfect performance.
Step 3:
