OPTICAL SYSTEMS DESIGN
DOC ID: 10117602
OSD2258 QUICK START GUIDE
PAGE 9
7
LED Indicators
TABLE 4: LED FUNCTION
LED
Function
Redundant
Power 1 and 2
Off
Power is Not Applied to Corresponding Input
Green
Power Connected to Corresponding Input
Power
Off
Unit is Off
Green
Unit is Powered On
Ring
Off
Non-Ring Mode (SW6 On)
Green
Redundant Ring
Amber
Bus
Green/Amber
Initializing
Link (speed)
Copper Port 1-8
Off
10Mb or No Link
Blink Amber
100Mb
Amber
1Gb
Act Copper Port
1-8
Off
No Connection/No Activity
Green
Link Established
Blink
Activity
SFP Ports 9-10
Off
No Link Established
Blink
SFP Link OK/Activity
8
Fitting SFP Connectors
Care should be taken when inserting/removing the SFP connectors from the SFP port as SFP modules
are Electrostatic (ES) sensitive and Electrostatic Discharge (ESD) precautions should be taken when
installing. Ensure that the SFP is fully engaged and latched into position.
Inserting SFP
– Ensure that the SFP lever is in the locked position and insert into appropriate SFP
port. Gently push the SFP until it locks into place. Remove plastic/rubber dust cap and fit appropriate
fiber cable.
Removing SFP
– Remove fiber connector. Pull the SFP lever down to unlock SFP from housing.
Using the lever, gently pull the SFP out.
Fiber SFP
FIGURE 6: FITTING/REMOVING SFP CONNECTORS
Inserting
SFP
Removing
SFP
1
2
