Optibase MGW 2000e, Quick Start Manual

Page: 20 / 28

MGW 2000e Quick Start Guide
14
Running a Channel
Once you have configured the channel, you can start
transmitting a stream. Follow the instructions to transmit a
channel.
MGW 2000e also lets you schedule a channel. For instructions
on scheduling a channel, refer to the user manual.
To transmit a stream:
1. In MGW 2000e Director’s Menu, click Channels . The
Channels page appears.
2. From the Channels list, select the channel you want to
transmit.
If the Run Channels button is disabled , no target has
been added to the channel. To run this channel, you must
first add a target as explained on page 13.
3. Click , MGW 2000e Director transmits the channel.
The Run Channel button now toggles to the Stop
Channel button .
4. Repeat steps 2-4 for each channel you want to transmit.
To stop transmitting:
•
Click ; the associated channel stops transmitting.
The Stop Channel button now toggles to the Run
Channel button .
Note
If you are logged on as MGW2000Guest , the Run and Stop buttons do not
show.